Physical AI, Explained · Part 2
The industry in numbers, 2026
Read this part in the book →The figures in this part come from a single source: RCSV Research, State of Robotics 2026 (Robotics Center, March 2026). They should be read as one firm's estimates rather than as official statistics. The report is free and broad in scope, and it also serves partly as a pitch for the publisher's own data services, which gives it an interest in emphasising the importance of data. Industry reports of this kind typically combine surveys of companies that chose to respond, public funding announcements and the analysts' own modelling, so each figure inherits the biases of its method: survey respondents tend to be the more active and visible firms, self-reported numbers are rarely audited, and market totals depend heavily on where the authors draw the boundary of "robotics". For these reasons the individual numbers are less reliable than the direction they point in. That direction is consistent across the report: hardware and data are getting cheaper, and economic value is moving into the data and model layer, meaning the datasets, trained policies and the infrastructure for producing them.
2.1 Market size and growth
The report estimates that the global robotics market reached $38B in 2026, up 34% on 2025, which it describes as the fastest growth in a decade. A figure like this is best treated as an order of magnitude. Market sizing requires decisions about what to include (industrial arms, warehouse vehicles, service robots, components, software, integration services), and two analysts using different definitions can arrive at very different totals from the same underlying activity. Growth rates computed within a single report are more trustworthy than the absolute level, because the same definition is applied to both years.
The more interesting claim is qualitative. In RCSV's reading, companies now differentiate themselves less by the robot itself than by whether they can run a repeating loop: collect data from real tasks, train a policy (the learned function that maps what the robot senses to the actions it takes) on that data, redeploy the improved policy, and do this again, quickly and at a cost the business can sustain. A company that can turn each deployment into training data for the next one improves with use, whereas a company selling a fixed machine improves only when it ships new hardware. This is the deployment flywheel seen from the market side.
2.2 Robot parts are becoming commodities
A commodity, in the economic sense, is a good that is standardised enough that buyers can switch between suppliers mainly on price. The components a robot is built from, such as actuators (the motor, gearbox and sensor units that move each joint), cameras, batteries and embedded computing boards, are increasingly of this kind: standard, mass-produced parts that any team can buy off the shelf rather than design in-house.
The effect already shows in finished robots. According to the report, fourteen manufacturers sell six- and seven-DoF arms for under $10K, eight of them Chinese. Degrees of freedom (DoF) count the independent ways a mechanism can move, which for an arm usually means the number of actuated joints. Six DoF is the minimum needed to place a tool at any reachable position and orientation in space; a seventh joint adds redundancy, letting the arm reach the same pose in more than one configuration so it can avoid obstacles or awkward joint limits. Twelve humanoid platforms can now be bought or leased, up from three in 2024, priced from $28K for an upper-body torso to $245K for a full biped, with lease programmes starting at $3.5K a month. The spread between those prices reflects real engineering differences: a torso mounted on a fixed base or wheeled platform avoids the hardest problems of a walking robot, namely dynamic balance, the high-torque leg actuators it requires and the cost of falls. Despite the growth in available platforms, full humanoids remain a small share of the robots actually shipped, which are still dominated by arms and mobile bases doing well-defined jobs.
These are list prices, and they should be read with that limit in mind. A purchase price excludes the grippers or hands, sensors, integration work, safety measures, maintenance and the engineering time needed to make a robot do a particular task, which in practice often exceed the cost of the hardware itself.
Why it matters: When capable parts are cheap and standard for everyone, owning them stops being an advantage. Value moves to what no supplier sells: knowing which tasks to automate, making robots work reliably at customer sites, and the data those deployments produce (11.2).
2.3 Data got 60% cheaper
The report puts the cost of a fully loaded hour of labelled teleoperation data at about $340 in early 2024, falling to $118 by March 2026. Teleoperation is the practice of a human operator controlling a robot remotely while the system records what the robot sensed and what it was commanded to do; each recorded attempt at a task is an episode, and a collection of good episodes becomes training data for imitation learning. "Fully loaded" means the figure includes everything required to produce a usable hour: operator wages, equipment, the robot's time, supervision, annotation and quality control, rather than the operator's time alone. "Labelled" means the episodes have been annotated with information such as task boundaries, success or failure, and language descriptions of what was done.
The report attributes the decline to three developments. The first is low-cost leader-follower teleoperation rigs, available for under $2K, in which the operator physically moves a small replica arm (the leader) and the robot arm (the follower) copies its joint positions in real time. The joint-to-joint mapping needs no motion capture or inverse kinematics. The second is annotation pipelines that cut labelling labour by 40 to 60%, typically by using models to propose segment boundaries and descriptions that humans then check rather than write from scratch. The third is the field settling on a few standard episode formats, so that recordings from one rig or lab can be loaded by common training tools without bespoke conversion code.
RCSV estimates that most manipulation tasks need 300 to 1,200 good demonstrations to generalise across 80% of in-distribution variation, meaning variation of the same kind the training data covered (different object positions, lighting or clutter within the expected range), as opposed to genuinely new situations. On that basis it puts a pilot's data budget at roughly $50K to $150K. Two qualifications apply. The demonstration counts depend strongly on task difficulty, on how much the scene varies and on the policy architecture, so they are a planning range, not a law. And the word "good" carries much of the weight: demonstrations that are hesitant, inconsistent between operators or full of corrections can teach a policy contradictory behaviour, which is why data quality often matters as much as quantity (2.4).
2.4 Imitation learning and VLAs went mainstream
For the first time in RCSV's survey, more teams named imitation learning as their primary training method (61%) than reinforcement learning (31%). Imitation learning trains a policy to reproduce the actions in human demonstrations, treating control as a supervised prediction problem; reinforcement learning (RL) instead has the robot learn by trial and error, improving its behaviour to maximise a reward signal, usually in simulation because real-world trial and error is slow and can damage hardware. The shift reflects the falling cost of demonstrations (2.3) and the practical difficulty of RL for manipulation: writing a reward function that captures what a task actually requires is hard, and policies trained in simulation must then cross the gap to the physics and appearance of the real world. Imitation learning has its own well-known weakness, compounding error: small mistakes carry the robot into states the demonstrations never showed, where its predictions are worse, so errors accumulate. Practitioners counter this with more diverse data, recovery demonstrations and policies that predict short sequences of actions rather than one step at a time. These are self-reported answers about a team's primary method, and many teams combine the two, for example by pretraining with imitation and refining with RL.
VLA models (vision-language-action models) are large neural networks that take camera images and a natural-language instruction as input and output robot actions, typically built by extending a model pretrained on internet-scale image and text data. Almost absent from production in 2024, they now underpin about 40% of new deployments, according to the report. The report also finds that fine-tuning a base VLA, meaning continuing to train an already pretrained model on a small task-specific dataset, on 200 to 500 task demonstrations now outperforms training a task-specific policy from scratch on 1,000 or more. The mechanism is transfer: the pretrained model already encodes general knowledge of objects, scenes and language, so the fine-tuning data only has to teach the specifics of the new task and robot. The comparison depends on the tasks and benchmarks chosen, and the report's summary does not allow it to be checked independently.
The debate: The report argues that beyond roughly 7B parameters, curation beats scale: a well-curated 500-demonstration fine-tune of a 7B model outperforms a poorly curated fine-tune of a 70B model on most manipulation benchmarks. If it holds, competitive advantage lies in collecting and cleaning task data rather than in training ever larger models, though benchmark results do not always carry over to real deployments.
2.5 Where robots are deployed
Logistics, semiconductors and food service account for most commercial deployments by unit volume, that is, by the number of robots installed rather than by the revenue they generate. These sectors share features that suit current robots: repetitive tasks, structured or controllable environments, and high labour costs or shortages.
The fastest growth is in the long tail of smaller sectors: healthcare and lab support (+94%) and food service (+61%). High percentage growth from a small base is common for young markets and can reflect a modest absolute number of new units, so these rates indicate where interest is forming rather than where most robots are. Lab and hospital work is attractive for the same reason as logistics, since tasks such as moving samples, loading instruments and delivering supplies recur constantly, but it adds stricter requirements for safety, hygiene and validation.
2.6 Where the money goes
Venture investment in robotics reached $9.4B in 2025, up 41%, but the ten largest rounds took 58% of it. That concentration means the headline total says little about the typical company: a handful of very large rounds, often for humanoid and foundation-model companies, can lift the aggregate while most startups raise far less. Median Series A pre-money valuations rose to $42M. A Series A is usually a company's first major institutional funding round after its seed stage, and the pre-money valuation is the value investors assign to the company immediately before their new money is added.
The report also finds that companies with proprietary data collection command a valuation premium of 1.4 to 1.8x, and that those with ten or more paying customers in one use case earn a further 1.3x. These multipliers are correlations drawn from the deals the analysts observed, not controlled measurements. Companies with their own data pipelines or many paying customers may differ in other ways too, such as team experience or revenue, that also raise valuations.
Why it matters: Investors pay a premium for proprietary data and for depth in one use case, but that premium is under pressure as fine-tuning foundation models shrinks the data advantage incumbents once had.
Reference: Robotics Center (2026). State of Robotics 2026: Annual Report on the Global Robotics Industry. RCSV Research. roboticscenter.ai/state-of-robotics-2026
← Part 1. Physical AI vs. digital AI Part 3. Robot intelligence →