Physical AI glossary
What is Actuator?
Actuator: a motor, gears, sensors, and control electronics at a joint; the robot's equivalent of a muscle. Actuators make up 30 to 50 percent of a humanoid's parts cost.
In the guide: 5.2 Actuators and component cost
An actuator is the robot's equivalent of a muscle and joint combined. It integrates an electric motor, a transmission (usually gears), one or more sensors and the control electronics that convert electrical power into precise motion. The bill of materials (BOM) lists the cost of every physical part in a product. Actuators make up 30 to 50 percent of a humanoid's BOM, and their basic design has barely changed in 50 years.
In the guide: 5.2 Actuators and component cost
The central design choice in an actuator is the transmission. Electric motors spin fast with little torque, while joints need to move slowly with a lot of torque, so a gearbox trades speed for torque by its gear reduction (the ratio of motor turns to output turns). The common families are these:
In the guide: 5.2 Actuators and component cost
- A harmonic drive (also called strain-wave gearing) uses a flexible toothed ring deformed by an elliptical cam inside a rigid outer ring. It achieves a high reduction in a compact, light package with almost no backlash (the free play between meshing teeth), which is why it is common in precise robot arms. Its drawbacks are limited tolerance to shock loads and high internal friction.
- A cycloidal drive uses a lobed disc that rolls eccentrically inside a ring of pins. It tolerates impacts better than a harmonic drive and also offers low backlash, at the cost of more weight and some vibration.
- A quasi-direct-drive (QDD) actuator pairs a large-diameter, high-torque motor with a low reduction, often a single planetary stage. Because there is little gearing between motor and load, the joint is backdrivable: an external force on the output can turn the motor, so the joint yields when it hits something. The motor current is then a reasonable estimate of joint torque, which allows force control without a separate torque sensor. Legged robots favour QDD for exactly this reason, since impacts with the ground are constant.